Dtc Audio CHAmp US

Dtc Audio CHAmp US

• Power Output RMS-100Watt
• No. of Mic Input 1 x Wired Microphone by combination jack
• 1 x UHF Wireless Microphone (Other frequencies are option)
• Volume Control 1 x Wired Microphone
• 1 x Wireless Microphone
• 1 x Aux
• Tone Control 1 x Treble, Independent / 1 x Bass, ±12dB Independent
• Operation Approx. 4 ~ 5 hours (Depending on operating condition)
• Aux. Input/Output 1 x In-RCA / 1 x Out-RCA
• Voice-over Adjustable 0 ~ 100% / 0 ~ max. 1.5sec.
• Digital Echo CMOS 44K memory / Delay time: 31ms ~ 340ms
• Speaker 8" Dynamic Full range + 2.5" Tweeter
• External Speaker >16Ω
• Built-In Battery 12V/14AH, Rechargeable & Sealed
• Charging Approx. 10 - 12hours for a Single charge
• Discharge Protection 10.6V (Factory set: Lowest voltage for ABMR)
• AC/DC Adapter (SMPS) AC100-240V 50-60Hz / DC15/4.5A UL/CE/CSA/TÜV
• Weight Approx. 17Kg-Nett
• Dimensions 270mm(L) x 270mm(W) x 410mm(H) Nett
• 350mm(L) x 350mm(W) x 560mm(H) Gross
• Wireless Receiver Specification
• Carrier Frequency UHF 863 ~ 865MHz (Other UHF/VHF Frequencies are option)
• Oscillation Mode PLL Synthesized
• No of Channel Single-Ch (Option Dual-Ch)
• Preset Frequency 16-Frequencies
• Bandwidth 24MHz
• Modulation Mode FM (F3E)
• S/N Ratio >105dB
• THD <0.5% @1KHz
• Frequency Response 50Hz~18KHz
• Wireless Transmitter Specification
• Carrier Frequency UHF 863 ~ 865MHz (Other UHF/VHF Frequencies are option)
• Oscillation Mode PLL Synthesized
• Bandwidth 24MHz
• RF Output 10mW (Can be adjusted basing on regulation)
• Spurious <-55dBc
• Battery 2 × 1.5V AA Type
• Current Drain 30~35mA, Typical
• Weight 240g
• USB/SD-Card Player Specification
• USB Player Support MP3-USB with USB2.0
• Function Mode, Folder +10 / -10 , F / B ward, Volume
• External Memory Unlimited